Standard Power Perfect Box

The standard Power Perfect box has 1 LED under the main cover which should be illuminated when the box is working. The HD and SD models have two LED lights under the main cover which should be illuminated when the box is working.

The optimal solution in most cases is the Power Perfect Box Wire-In. It provides maximum protection for all circuits on all phases right at the breaker panel. It also provides additional protection and filtering with its Phase-to-Phase filtering capabilities. The Power Perfect Box Plug-In will definitely protect the circuit on which it is installed and other circuits on the same phase but it doesn’t protect as optimally as the Power Perfect Box Wire-In. It also only filters Phase-to-Neutral. The Power Perfect Box Plug-Ins may be better for lower EMI readings in some situations.

If installed correctly, there is nothing in the Power Perfect Box product line that can harm your electrical system. They are UL (Underwriter Laboratory) listed and would not be if they could harm your electrical system.

Yes, the Power Perfect Box Wire-In will provide immediate benefits through its energy management and filtering capabilities. It will provide voltage regulation, surge protection, harmonics filtering and EMF reduction both before and after solar installation. This will ensure that your electrical system provides clean, efficient power and will result in your appliances and electronics running cooler and lasting longer. 

If a person is a renter, they may choose to purchase two Power Perfect Box Plug-Ins, one for each Phase, as it can be taken with them when they move or to identify and treat specific hot spots, in home or office as the Power Perfect Box Plug-In does a superior job of treating specific hot spot or problem areas of excessively high THD or EMF. However, as a Rule of Thumb, a general assessment can be done as to what is the right solution (including possibly the Power Perfect Box Wire-In HD) using the following rules:

 Square Footage of Residence

• Homes/Apts. with area of 500SF to 1000SF = 2 Plug-Ins
• Homes/Apts. with area of 1000SF to 3500SF = Wire-In or 2-4 Plug-Ins
• Homes/Apts. with area of 3500SF or greater = Wire-In H.D. or 4-6 Plug-Ins

Monthly Consumption Average (Rule of Thumb)

• Homes consumption is less than 500 kWh per month = 2 Plug-Ins
• Homes consumption is between 500 and 1000kWh per month = Wire-In or 2-4 Plug-Ins
• Homes consumption is greater than 1000kWh per month = Wire-In H.D. or 4-6 Plug-Ins

Utility Service Size (Rule of Thumb)

• Homes with less than 60 Amps service = 2 Plug-Ins
• Homes with 60 Amps - 200 Amps of service = Wire-In or 2-4 Plug-Ins
• Homes with greater than 200 Amps of service = Wire-In H.D. or 4-6 Plug-Ins

EMI Meter's measures the relative amount of dirty electricity, or electromagnetic interference (EMI), on wiring in buildings. It measures the amount of EMI in millivolts (mV). The amount of EMI correlates to the amount of sound emitted by the EMI meter which also relates to the amount of EMF on the wiring. The Power Perfect Box Plug-In acts as an EMI filter and reduces the amount of EMI. Using the EMI Meter to measure before and after plugging in a Power Perfect Box Plug-In will demonstrate how it can reduce the amount of EMI and related EMF radiation.

Readings tend to be a snapshot in time. It will depend on a number of factors including what devices are running or powered on at that time. Conditions vary and can be impacted by power fluctuations as well as what the neighbors have running on their systems as electrical systems are actually interconnected. To test its effectiveness, try measuring it with the breaker off and with the breaker on. On rare occasions, the Power Perfect Box Wire-In may have been installed incorrectly. A common problem has been that the Neutral wire from the box was installed on the Ground bar rather than the Neutral bar in the distribution panel.

All of us have different capabilities to sense or feel in different ways. There are those that are considered to be electrohypersensitive (EHS). These individuals are very sensitive to electromagnetic frequencies (EMF) and the related radiation. Since the Power Perfect Box Wire-In and Plug-In products filter out harmonics and reduce EMF, these individuals can sometimes “feel” the difference.

Smart meters are well-known for introducing harmonics into the electrical system by nature as well as a means of monitoring and potentially controlling usage of electronic devices and appliances. These harmonics create electromagnetic interference (EMI) and electromagnetic frequencies (EMF) that produce increased electromagnetic radiation (EMR). So those with EHS may be impacted by and affected by smart meters. In addition, with increased harmonics and related dirty energy, it would seem that smart meters are actually making electrical systems less efficient. Many report much higher electrical bills after smart meters are installed.

The Power Perfect Box Wire-In will effectively filter and clean the electricity coming in from your utility or smart meter as well as the harmonics that are created within your electrical system. This filtering of harmonics also protects your privacy as smart meters use various harmonics across the electrical wires to query information from smart appliances and then communicates that information to the power company. The Power Perfect Box Wire-In also filters out these harmonics and as a result protects your privacy.

No, it doesn’t directly stop radio frequency waves. It’s important to realize, though, that the electrical wiring in your home acts like a large antenna that receives those waves and propagates them as harmonics throughout your home on via the electrical wiring. The Power Perfect Box Wire-In will filter out those harmonics and keep them from spreading throughout your system, thus reducing your exposure to EMF and EMR.

Your electrician has likely never seen or tested this unit and is referring to older capacitor based systems that are not digital in nature. The Power Perfect Box Wire-In does not use oil filled capacitors but rather harmonic rectifiers developed by NASA to filter electricity, improve efficiency and protect electronics on the space shuttle. This technology has been adapted to create a modern energy management system that can regulate voltage, filter out potential negative harmonics and provide phase correction, making your electricity more efficient. Greater efficiency and less electrical consumption usually results in cost savings.

No – it is the exact same technology as what is found in the Power Perfect Super Duty Box, so they are interchangeable.